I've been trying to find the dimensions for the Standel cabinet (like Chets amp) on line and haven't been able too. Would appreciate the dimensions from someone who has one or a clone.
Thanks,
GaryL
Re: Amplifier cabinet dimensions
I found them online a couple years back, but don't have them handy at this moment. I'll look for them. From memory: something like 22 1/2 inches wide, 19 high and 10 1/2 deep at the bottom, tapering to 7 1/2 at the top. Both the back and front are slanted. I'll report back if and when I find them; I'm sure only about the depth, not the height and width. At least, that's what was stated in the article online--I've not made my own measurements.
- bill raymond
- Posts: 126
- Joined: Mon Aug 16, 2010 10:58 pm
Re: Amplifier cabinet dimensions
I found my notes: height = 21", width = 22.5", depth = 10.5" at base, 7.5" at the top. These dimensions were given in a review of the Standel reissues on some website, probably Harmony Central, but I can't locate that particular review in a search for it. I hope this helps you.
- bill raymond
- Posts: 126
- Joined: Mon Aug 16, 2010 10:58 pm
Re: Amplifier cabinet dimensions
Bill,
Thanks for the information. That helps.
GaryL
Thanks for the information. That helps.
GaryL
- GaryL
- Posts: 410
- Joined: Tue Aug 17, 2010 9:20 pm
