Messin'

Watch and share videos from youtube

Re: Messin'

Postby Norm » Wed Sep 12, 2012 9:13 pm

Good stuff!

I agree these little interface gadgets make recording a whole lot easier...

The Young Turks get all the toys we never had Back Then!
...that's how it looks to me...The opinion expressed above is my own and does not necessarily reflect the views of this station. Your mileage may vary...

Audio samples: http://www.youtube.com/user/acountrygent/videos
That should do it.
Norm
 
Posts: 1333
Joined: Wed Aug 31, 2011 12:36 pm
Location: redwood city ca

Re: Messin'

Postby keener » Wed Sep 12, 2012 10:40 pm

Thank you Norm. I hope you're doing well.

Bruce
keener
 
Posts: 764
Joined: Mon Aug 16, 2010 9:16 pm

Re: Messin'

Postby keener » Wed Sep 12, 2012 11:19 pm

Roger,

I finally read that article on latency ... fascinating stuff. I was a bit surprised that the human ear can hear a sound within 3ms from when it reached the ear. That's pretty amazing. Most of our systems take tens or hundreds of milliseconds to respond.

Thanks again
Bruce
keener
 
Posts: 764
Joined: Mon Aug 16, 2010 9:16 pm

Re: Messin'

Postby Roger Hardin » Thu Sep 13, 2012 11:42 am

Bruce

If you are just doing youtube video's using the native mac software, you might not need any of that. Just playing through your amp for monitoring purposes while routing your guitar to the presonus sound device should be fine. I use low latency configurations only while using effects or software synths in Reaper or Sonar. When I am mixing or attempting to master something, I usually raise the latency up to free up my processor. Hopefully that article will help you understand what you are dealing with and why you have the delay. I would think by installing the presonus software drivers, you would have more options on latency.

Thanks
Roger Hardin
 
Posts: 116
Joined: Mon Aug 16, 2010 10:25 pm

Re: Messin'

Postby keener » Thu Sep 13, 2012 4:28 pm

Good clarifications, Roger. I don't expect to do anything but straightforward youtubes, but it sure is good to know more about mixing, in case I do get off my tailfeathers and decide to experiment with mixing. More importantly, I suspect a lot of folks on this board are interested in mixing, and your information could be invaluable to them.

Many thanks,
Bruce
keener
 
Posts: 764
Joined: Mon Aug 16, 2010 9:16 pm

Previous

Return to Video Files

Who is online

Users browsing this forum: No registered users and 14 guests