Page 1 of 1
Amplifier cabinet dimensions

Posted:
Wed Jun 06, 2012 7:06 am
by GaryL
I've been trying to find the dimensions for the Standel cabinet (like Chets amp) on line and haven't been able too. Would appreciate the dimensions from someone who has one or a clone.
Thanks,
GaryL
Re: Amplifier cabinet dimensions

Posted:
Wed Jun 06, 2012 10:51 am
by bill raymond
I found them online a couple years back, but don't have them handy at this moment. I'll look for them. From memory: something like 22 1/2 inches wide, 19 high and 10 1/2 deep at the bottom, tapering to 7 1/2 at the top. Both the back and front are slanted. I'll report back if and when I find them; I'm sure only about the depth, not the height and width. At least, that's what was stated in the article online--I've not made my own measurements.
Re: Amplifier cabinet dimensions

Posted:
Wed Jun 06, 2012 9:06 pm
by bill raymond
I found my notes: height = 21", width = 22.5", depth = 10.5" at base, 7.5" at the top. These dimensions were given in a review of the Standel reissues on some website, probably Harmony Central, but I can't locate that particular review in a search for it. I hope this helps you.
Re: Amplifier cabinet dimensions

Posted:
Wed Jun 06, 2012 10:19 pm
by GaryL
Bill,
Thanks for the information. That helps.
GaryL