Norm wrote:albertgen wrote:I like the stationary bracket and use it on my guitars but I do have to admit you can get a better vibrato effect with the swivel bracket. Al
That seems odd since there is the possibility of more play in the swivel arm whereas the stationary bracket and handle all the motion goes directly to the string bar.
There's a way to tighten up that free-play in the swivel handle . . .
1. Go to the hardware store and get a LEATHER CUP WASHER.
2. Loosen the strings enough to be able to swing the handle upward
3. REMOVE the nut & carriage bolt & remove the handle
4. SOAK the washer with 3-in-1 oil or WD-40
5. REASSEMBLE placing the LEATHER CUP WASHER between the handle and the bracket.
6. TIGHTEN the nut until you get the desired DRAG of the handle movement.
NOTE-The nut may need occasional re-tightening depending on how tight you like the tension.
7. Tune to pitch.
I've resolved many a loose Bigsby handle doing this . . .
